泰安附近想过夜电话联系

Ningxia Jiquan stainless steel water tank sells well in Wuhai Alashan area

08-24 one thousand and forty-four

Ningxia Jiquan stainless steel water tank sells well in Wuhai Alashan area

Features of stainless steel water tank: stainless steel material is stable in physical and chemical properties, non-toxic and strong corrosion resistance. It can completely reflect in the sunlight to absorb heat, and there is no algae inside. The water quality is clean at any time. The water tank is high in strength, light in weight, clean in appearance, beautiful and elegant in appearance. The stainless steel water tank has beautiful appearance, light weight, low cost, long service life, simple installation and wide use Stainless steel water tank is equipped with air filtration and inspection and cleaning manhole to protect water source from secondary pollution. It is the best water storage and water supply equipment in the world, and stainless steel water tank is the best choice for domestic water tank.
Technical requirements and parameters for site fabrication of Alxa stainless steel water tank in Wuhai
1. The stainless steel water tank is designed in accordance with the requirements of national standard atlas No. 12s101. The stainless steel tie bar set in the water tank shall be welded by argon arc welding, the lap length shall not be less than 100, and the lap joint shall be through welding; the water tank and accessories shall be made of ordinary carbon steel plate and section steel, and e43xx type welding rod shall be welded, and their quality shall meet the current standards of carbon structural steel and carbon steel welding respectively The regulations of the article. The butt weld between the top plate and bottom plate of the box is not allowed to be overlapped with the bottom plate of the box, and the butt weld between the top plate and the bottom plate of the box is not allowed to be overlapped.
2. Full water test: after the water tank is made, the water tank is completely filled with water. After 2-3 hours, tap the water tank with hammer lead weighing 0.5-1.5 kg along the two sides of the weld, and it is qualified if there is no water leakage. If water leakage is found, it is necessary to re weld and then conduct the experiment.
3. Specification of water tank: 0.5t-500t can be made, and can undertake special production of square, horizontal and other types according to customer requirements.
Stainless steel water tank or stainless steel water tank can be installed. The top corner of the stainless steel water tank is equipped with a ventilation air filtering device. The specification and quantity of the device are determined by the manufacturer according to the import size. Tie bars are used inside the stainless steel water tank. All nozzle flanges are 1.0MPa standard flange. Designers should refer to GB 17051-2006 sanitary code for secondary water supply facilities when arranging the water tank position. When the specification and technical parameters or orientation of the water tank are not suitable for the actual use, the designer of the stainless steel water tank shall propose and determine it according to the actual needs.
Welcome to inquire the price of stainless steel water tank, stainless steel water tank processing, stainless steel water tank stamping plate series products. To provide you with stainless steel fire water tank, stainless steel heat preservation water tank, stainless steel water tank molding block, welcome to inquire 18095174046; we will provide you with the corresponding design scheme and related supporting facilities.