Operation principle and product classification of tank pump integrated water tank equipment
06-20 nine hundred and sixty-eight
The inlet pipe of the tank pump integrated water tank is directly connected with the tap water pipe network, and the water is pressed into the equipment inlet pipe under the driving of the residual pressure of the water pipe network. The pressurized water pump of the equipment continues to pressurize on the basis of the residual pressure of the inlet water, and then supplies water to the outlet pipe network after the water supply pressure is increased to the pressure required by the user; when the water consumption of the user is greater than the water supply amount of the water pipe network, the pressure of the inlet pipe network is When the water inlet pressure of the equipment drops to the absolute pressure less than 0 (or the set protection pressure of the pipe network), the negative pressure prevention and control device in the equipment will automatically start to work, adjust the operation status of the equipment until the equipment is shut down and standby, so as to ensure that the pressure of the water inlet pipe network is no longer reduced, which will cause adverse impact on the water supply network; when the water supply capacity of the water supply pipe network is restored, the water inlet pipe network will be improved When the pressure returns to above the protection pressure, the equipment will automatically start up and resume normal water supply; when the residual pressure of the water supply pipe network meets the water supply requirements of the users, the equipment will automatically enter the dormant state, and the water supply network will directly supply water to the users, and the equipment will automatically resume operation when the water supply is insufficient; when the user does not use water or the water consumption is very small, the equipment will automatically enter the shutdown dormancy state, and the device will automatically enter the dormant state The small flow pressure stabilizing tank at the outlet side of the equipment can maintain the quantity of water used by users and the pipe network leaks. When the pressure stabilizing tank for user water cannot maintain the required pressure of the water supply pipe network, the equipment will wake up automatically and resume normal operation. During the operation of the equipment, the residual pressure of the water pipe network is fully utilized, which will not cause adverse impact on the water supply network, but also meet the needs of users to the maximum extent, reduce the energy consumption of water supply and realize the optimal operation of the water supply system.
Classification of tank pump integrated water tank equipment:
1、 Tank type box pump integrated pumping station equipment
2、 Box pump integrated pumping station equipment
3、 Integrated pumping station equipment with pump in pipe and box pump
4、 Canned motor pump box pump integrated pumping station equipment
5、 Mechanical box pump integrated pumping station equipment
6、 Pump station integrated electronic box
Case pump integrated water tank hotline 18095174046; Yinchuan water tank Wuhai water tank Recommended products!